Wand Switch Operation

With our wand switch electric window blinds, you can have the wand fitted to either the right or left hand side of the blind. The motor is discreet as it’s contained within the blind tube and cannot be seen – so your blinds are sleek and stylish to complement the rest of your home’s interior.
The batteries are included and can easily be replaced with standard AA alkaline batteries when required.
Dimensions:

• Minimum width 46.5cm and maximum width 160cm.
• Minimum drop 30cm and maximum drop 175cm. 

Click here to view our full range of electric roller blinds.
 

Remote Control Operation

Our remote control motorised blinds come with a stylish handset, as well as an optional wall holder to store it. With a single remote, you can operate up to five different blinds, giving you a simple and effective way to control how much daylight enters your home.
 

Our electric blinds are sleek and easy to maintain - the sealed lithium battery and motor are both contained within the roller blind tube and are unseen. The battery is rechargeable using the detachable plug-in adapter supplied. 
Dimensions:

• Minimum width 46.5cm and maximum width 300cm.
• Minimum drop 30CM and maximum drop 300cm.

Please note:
Blinds up to 200cm x 200cm will generally be supplied on a 35mm diameter metal tube system, blinds over 200cm up to 300cm will use 40mm metal tube.

Any ‘mixed size’ orders will be supplied all on 40mm tube wherever possible.
The remote handset controls for each tube/motor size differ slightly in appearance but have the same functionality. All can be used with Smart Hub.
 

Solar Panel Option*

In keeping with our green aesthetic, we have introduced a solar panel which can be wired into your motor, to ensure constant charge.  This removed the worry for the higher up, hard to reach blinds that would need to be taken down to recharge the battery.  Greener, safer and all-around better for the enviroment,  our solar panel will save you time and money.

The solar panel comes with its own fitting brackets and as you can see below, the wire easily slots into your blind motor.  This option is suitable for south, west and easy facing windows, in full daylight.

The panel is designed to be fitted behind the main electric roller blind, and out of general view.  No distasteful bulk units spoiling your view.



* Please note that the solar panel charger is not suitable for use with treated UV reflective glass.